Impact of pH buffer capacity of sediment on dechlorination of atrazine using zero valent iron

This research investigated the role of the pH buffer capacity of sediment on the dechlorination of atrazine using zero valent iron (ZVI). The buffer capacity of the sediment was quantified by batch experiments and estimated to be 5.0 cmol OH^? · pH^?1. The sediments were spiked with atrazine at 7.25-36.23 mg kg^?1 (6.21 × 10^?7–3.09 × 10^?6 mol atrazine · g^?1 sediment) for the batch experiments. The buffer capacity of the sediment maintained the sediment suspension at neutral pH, thereby enabling continuous dechlorination until the buffer capacity of the sediment was depleted. The pseudo-first order dechlorination constants were estimated to be in the range of 1.19 × 10^?2?7.04 × 10^?2 d^?1 for the atrazine-spiked sediments.     

Recovery of indium from used LCD panel by a time efficient and environmentally sound method assisted HEBM

In this study, a method which is environmentally sound, time and energy efficient has been used for recovery of indium from used liquid crystal display (LCD) panels. In this method, indium tin oxide (ITO) glass was crushed to micron size particles in seconds via high energy ball milling (HEBM). The parameters affecting the amount of dissolved indium such as milling time, particle size, effect time of acid solution, amount of HCl in the acid solution were tried to be optimized. The results show that by crushing ITO glass to micron size particles by HEBM, it is possible to extract higher amount of indium at room temperature than that by conventional methods using only conventional shredding machines. In this study, 86% of indium which exists in raw materials was recovered about in a very short time.     

Influence of atmospheric dispersion and new particle formation events on ambient particle number concentration in Rochester, United States, and Toronto, Canada

Continuous measurements of particle number concentrations were performed in Rochester, NY, and Toronto, Ontario, Canada during the 2003 calendar year. Strong seasonal dependency in particle number concentration was observed at two sites. The average number concentration of ambient particles was 9670 +/- 6960 cm(-3) in Rochester, whereas in Toronto the average number of particles was 28,010 +/- 13,350 cm(-3). The particle number concentrations were higher in winter months than in summer months by a factor of 1.5 in Rochester and 1.6 in Toronto. In general, there were also distinct diurnal variations of aerosol number concentration. The highest weekdays/weekends ratio of number concentration was typically observed during the rush-hour period in winter months with a ratio of 2.1 in Rochester and 2.0 in Toronto. The correlation in the total particle number concentrations between the two urban sites was stronger in winter because of the common urban traffic patterns, but weaker in summer because of local sulfur dioxide (SO2)-related particle formation events in Rochester in the summer. Strong morning particle formation events were frequently observed during colder winter months. Good correlations between particle number and carbon monoxide (CO) as well as temperature suggested that motorvehicle emissions lead to the formation of new particles as the exhaust mixes with the cold air. Regional nucleation and growth events frequently occurred in April. Local SO2-related particle formation events most frequently occurred in August. SO2 and UV-B were highly correlated with particle concentration, suggesting a high association of photochemical processes with these local events. A high directionality in a northerly direction was observed for particle number and SO2, indicating the influence of point sources located north of Rochester.     

Volatile pollutants emitted from selected liquid household products

BACKGROUND, AIM, AND SCOPE: To identify household products that may be potential sources of indoor air pollution, the chemical composition emitted from the products should be surveyed. Although this kind of survey has been conducted by certain research groups in Western Europe and the USA, there is still limited information in scientific literature. Moreover, chemical components and their proportions of household products are suspected to be different with different manufacturers. Consequently, the current study evaluated the emission composition for 42 liquid household products sold in Korea, focusing on five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). MATERIALS AND METHODS: The present study included two phase experiments. First, the chemical components and their proportions in household products were determined using a gas chromatograph and mass spectrometer system. For the 19 target compounds screened by the first phase of the experiment and other selection criteria, the second phase was done to identify their proportions in the purged-gas phase. RESULTS: The number of chemicals in the household products surveyed ranged from 9 to 113. Eight (product class of pesticides) to 17 (product class of cleaning products) compounds were detected in the purged-gas phase of each product class. Several compounds were identified in more than one product class. Six chemicals (acetone, ethanol, limonene, perchloroethylene (PCE), phenol, and 1-propanol) were identified in all five product classes. There were 13 analytes occurring with a frequency of more than 10% in the household products: limonene (76.2%), ethanol (71.4%), PCE (66.7%), phenol (40.5%), 1-propanol (35.7%), decane (33%), acetone (28.6%), toluene (19.0%), 2-butoxy ethanol (16.7%), o-xylene (16.7%), chlorobenzene (14.3%), ethylbenzene (11.9%), and hexane (11.9%). All of the 42 household products analyzed were found to contain one or more of the 19 compounds. DISCUSSION: The chemical composition varied broadly along with the product classes or product categories, and it was different from that reported in other studies abroad, although certain target chemicals were identified in both studies. This finding supports an assertion that chemical components emitted from household products may be different in different products and with different manufacturers. The chlorinated pollutants identified in the present study have not been reported to be components of cleaning products in papers published since the early 1990s. Limonene was identified as having the highest occurrence in the household products in the present study, although it was not detected in any of 67 household products sold in the U.S. CONCLUSIONS: The emission composition of selected household products was successfully examined by purge-and-trap analysis. Along with other exposure information such as use pattern of household products and the indoor climate, this composition data can be used to estimate personal exposure levels of building occupants. This exposure data can be employed to link environmental exposure to health risk. It is noteworthy that many liquid household products sold in Korea emitted several toxic aromatic and chlorinated organic compounds. Moreover, the current finding suggests that product types and manufacturers should be considered, when evaluating building occupants' exposure to chemical components emitted from household products. RECOMMENDATIONS AND PERSPECTIVES: The current findings can provide valuable information for the semiquantitative estimation of the population inhalation exposure to these compounds in indoor environments and for the selection of safer household products. However, although the chemical composition is known, the emissions of household products might include compounds formed during the use of the product or compounds not identified as ingredients by this study. Accordingly, further studies are required, and testing must be done to determine the actual composition being emitted. Similar to eco-labeling of shampoos, shower gels, and foam baths proposed by a previous study, eco-labeling of other household products is suggested.     

Impact of pH buffer capacity of sediment on dechlorination of atrazine using zero valent iron

This research investigated the role of the pH buffer capacity of sediment on the dechlorination of atrazine using zero valent iron (ZVI). The buffer capacity of the sediment was quantified by batch experiments and estimated to be 5.0 cmol OH(-) . pH(-1). The sediments were spiked with atrazine at 7.25-36.23 mg kg(-1) (6.21 x 10(-7)-3.09 x 10(-6) mol atrazine . g(-1) sediment) for the batch experiments. The buffer capacity of the sediment maintained the sediment suspension at neutral pH, thereby enabling continuous dechlorination until the buffer capacity of the sediment was depleted. The pseudo-first order dechlorination constants were estimated to be in the range of 1.19 x 10(-2)-7.04 x 10(-2) d(-1) for the atrazine-spiked sediments.     

Mid‐Range Streamflow Forecasts Based on Climate Modeling – Statistical Correction and Evaluation1

Abstract: Mid‐range streamflow predictions are extremely important for managing water resources. The ability to provide mid‐range (three to six months) streamflow forecasts enables considerable improvements in water resources system operations. The skill and economic value of such forecasts are of great interest. In this research, output from a general circulation model (GCM) is used to generate hydrologic input for mid‐range streamflow forecasts. Statistical procedures including: (1) transformation, (2) correction, (3) observation of ensemble average, (4) improvement of forecast, and (5) forecast skill test are conducted to minimize the error associated with different spatial resolution between the large‐scale GCM and the finer‐scale hydrologic model and to improve forecast skills. The accuracy of a streamflow forecast generated using a hydrologic model forced with GCM output for the basin was evaluated by forecast skill scores associated with the set of streamflow forecast values in a categorical forecast. Despite the generally low forecast skill score exhibited by the climate forecasting approach, precipitation forecast skill clearly improves when a conditional forecast is performed during the East Asia summer monsoon, June through August.     

Prenatal diagnosis of congenital epulis by three-dimensional ultrasound and magnetic resonance imaging

Congenital epulis is a benign intraoral tumor that has rarely been diagnosed prenatally. We report a fetus with congenital epulis diagnosed by three-dimensional (3-D) ultrasound and fetal magnetic resonance imaging (MRI) at 35 weeks' gestation. We show an image of congenital epulis using a new ultrasound technique, the 3-D multislice view, which shows images similar to CT or MRI. This is a short case report of congenital epulis diagnosed prenatally by 3-D ultrasound using multislice view and MRI. Copyright © 2006 John Wiley & Sons, Ltd.     

Using the Triad Approach to expedite the acquisition of an Abbott district school site

The Triad Approach was field‐tested to determine if characterization objectives could be met for a brownfields property that had been identified as a future elementary school site. The new school is in response to a New Jersey Supreme Court ruling (the Abbott decision) that directed the state of New Jersey to fund school construction in poorer districts to expand physical facilities to relieve overcrowding. The Triad Approach is promoted by the United States Environmental Protection Agency as a process that has the potential to improve the timeliness and efficiency of site characterization, and the New Jersey Department of Environmental Protection (NJDEP) recently issued a policy statement supporting its potential. Aggressive school construction deadlines are contingent on property acquisitions that are relatively faster than the traditional investigatory process. In addition, given the future sensitive population, the investigations must be thorough. This case study is among the first studies to document the use of the Triad Approach for a future school site. The Triad Approach was used to define site conditions for six areas of concern in a two‐month time frame (from the start of the planning process to completed investigation). © 2004 Wiley Periodicals, Inc.